this is a description of how I started out in ham radio on the cheap.

when i passed my technician test one of the friends of mine who talked me into becoming a ham KF5IXZ Marty (now silent key) sent me a used Kenwood 2m business band radio that was supposed to be preprogrammed for my local repeaters but the person who programed it for him reversed the transmit tone and the receive tone so therefore i could hear nothing and no one could hear me. he also sent me a 1/4 wave ground plane antenna he had built. those radios are channelized and only programmable with the proper software and cable. so wile i was hunting down the proper cable and software to correct the programing in that radio i went ahead and ordered a baofeng uv-5r and a programing cable.  those radios were just becoming common at that time cost me about $35 shipped. and got on the air with that

eventually i tracked down the proper cable and software for a price i could live with and got the kenwood radio reprogrammed

i already had an old 10 amp radio shack power supply the older transformer type from a previous project but it had been in storage for the last 15 year and the capacitors had dried out and it would not hold voltage at full power so therefor i wired a 7ah SLA battery i had on hand to the power supply then connected the radio to that it just acts as a big capacitor keeping the voltage from dropping to low when i transmit. combine that with a 20 foot coax cable from radio shack and i had a working 2m station.

in that time frame somewhere i ran into mike who had also just got his tech he was one of the first KD9 callsigns in our area and i was one of the last KC9 we kinda drawn to each other because we were both newbies and liked to talk he has since moved out of state and changed his callsign but we still talk over Echolink almost daily he has his extra now and is in a very active area for ham radio.

2m and 70cm are not really active here in my area. so Marty and my other elmer Scott H as well as members of the local club pushed me to get my general and move to HF

so i  passed my general then the question was how to afford a radio we had just bought a house in Dec of 2013 just after i got my technician license and at that time every Penney counted but eventually i got a refund for the money i had to put in escrow to guarantee that i would complete the painting and repairs to the exterior that the FHA required (little tip if your buying a repo house through the FHA buy it in the winter after its to cold for exterior painting that way if the FHA inspector requires any repairs or painting to the exterior you can just put money in escrow then complete the repairs and painting yourself after the sale in the spring and then get your money back if you buy in the summer they will force you to pay to have it done before closing)

after a long talk with my wife think on my knees begging it was decided i was allowed to use $500 of that refund to buy a used HF rig

after a couple local deals that fell through my elmer Scott called and informed me that Associated Radio in Kansas had a used Kenwood TS-430s for sale on there website for $450 that would make a really good radio for me Scott was familiar with that business as it was local to him and he had dealt with them numerous times.

Marty pointed me toward a surplus 25 amp switching power supply that was available at the time for pretty cheap that him and his friends had been buying and had proven to be free from electrical noise that plagues most cheap switching power supplies

by that time my elmer Marty KF5IXZ had been diagnosed with leukemia so i bought 100 feet of RG8X equivalent coax from a local electronics wholesaler and some solder on pl-259’s and adapters and a so-239 chassis mount.

i had Lowell who is a local ham but he is not much into talking on the radio he mostly builds and fixes stuff he showed me how to solder the ends on.

then i used a spool of old copper wire left over from my fathers hvac business along with that 20-239 and some cloths line rope to make a 20M dipole Lowell loaned me a radio shack SWR meter for HF that allowed me to tune the antenna i was able to make contact and talk with Marty on 20m SSB a couple times before he died over that piece of wire.

bartered for an older copy of the AARL handbook and in that handbook is how to  wind a coax balun in the end of your coax for a dipole when you do not have a regular balun that info is also available online

i made a number of contacts with that antenna it would have worked better if i had been able to get it higher i only had it about 15 feet off the ground. i shortened it to 17M for a wile and made my first contact to outside north America on that it was to Costa Rica

eventually i found a used antenna tuner. again out of the used section of associated radio it is a mfj-901 not the B model but an original 901 i do not remember what i paid for it but it was cheap enough that i jumped at it when i saw it on there site. it was under $50 and it has works very well.

having an antenna tuner allowed me to start contemplating a multi band antenna and after thinking long and hard about what i could do cheaply that would be reasonably effective i decided on a coax fed end fed random length antenna using a home made 9:1 UNUN you can see a photo of the waterproof box i used to hold the UNUN below you can see details about the antenna here.

after the 2015 field day i was determined i wanted to try digital modes so i did allot of research into different sound card adapters and settled on the easydigi with usb ptt  which cost $50 specifically set up for my radio with everything needed to make it work. all the cables everything.

i use it mostly for psk31 which i find very enjoyable but i have also set up and experimented with winlink with it as well as a couple other modes.

radiotesting2 antenna2 0910151332 0910151712a